Test Measurement Devices

Ultrasonic Thickness Gauges and Meters Show all

Infrared Thermometers Show all

Formaldehyde Detectors Show all

Refractometers Show all

Subcategory Questions Show all

Q
Does it work with most materials, aluminum, titanium and steel tubings with same resolution, 0.01mm? Can it be used on bent tubing to determine thinning during bending?Mohammad S. on Aug 28, 2017
A
Best answer Hello Mohammad, thank you for your question. Yes this ultrasonic thickness gauge will work with different type of metals. You would just need to change the velocity of the sound wave on the gauge to the respected metal you are measuring. Yes the gauge should be able to help you determine and thinning of the tube caused by bending or corrosion.
Reply Deelat Industrial on Sep 18, 2017
Q
Concern about accuracy. Don't want to replace 4000 sq.ft. of chinese made flooring based on a false reading. PLease advise.Gene H. on Oct 26, 2017
A
Best answer Hello Gene, thank you for your question. The meters accuracy has been tested and falls at +/-0.03 mg/m3 or +/-5%. We are aware of the issues with Chinese flooring. Our recommendation is not only to use this meter but also check with the manufacturing date of the flooring as the affected flooring was manufactured between 2012-2014.
Reply Deelat Industrial on Oct 26, 2017
Q
Will this product measure the thickness of concrete? Thanks SteveSteve L. on Feb 19, 2018
A
Best answer Hello Steve, thank you for your question. No our ultrasonic thickness gauge will not measure the thickness of concrete.
Reply Deelat Industrial on Feb 26, 2018
Q
Can it be used to measure boiler tubes and at what temperature does it operate best.John O. on Feb 26, 2017
A
Best answer Thank you for your question John. These Thickness gauges are able to measure boiler tubes. the Operation temperature is -10 to 60 Degrees Celsius. Please contact customer support if you have any other questions or concerns.
Reply Deelat Industrial on Feb 27, 2017
Q
Where can I find info on the acceptable limits of formaldyhyde?Jane S. on Nov 15, 2017
A
Best answer Hello Jane, thank you for your question. We recommend to search the EPA website for the acceptable limits of formaldehyde. This link will direct you to the section on formaldehyde on the EPA site: https://www.epa.gov/formaldehyde
Reply Deelat Industrial on Nov 15, 2017
Q
What about coated surfaces? are different probes available to get more accurate scans when using with painted surfacesCraig W. on Feb 14, 2018
A
Best answer Hello Craig, thank you for your question. There are no other probes available with this ultrasonic thickness gauge. Only the standard probe that comes with the ultrasonic thickness gauge itself.
Reply Deelat Industrial on Feb 26, 2018
Q
How does this unit perform when measuring the thickness of layered materials? We need to measure the thickness of concrete lined ductile iron pipe. Would this give us the total thickness(metal pipe + concrete lining) or just the thickness of the metal? Does material in the pipe affect the measurement?Josh B. on Feb 15, 2018
A
Best answer Hello Josh, thank you for your question. No our ultrasonic thickness gauges will not be able to measure the thickness of concrete. If what you are measuring is concrete lined then this gauge is not suitable for your application.
Reply Deelat Industrial on Feb 26, 2018
Q
Would the presence of phenol affect the accuracy of the formaldehyde measurement?Fred L. on Mar 06, 2018
A
Best answer Hello Fred, thank you for your question. We were able to confirm that our Formaldehyde meter's accuracy would be affected by the presence of phenol. If you have any other questions or concerns please do not hesitate to contact our customer support team.
Reply Deelat Industrial on Mar 08, 2018
Q
Does this unit have a data logger? Can I plug it into a computer to get results of tests?Sarah L. on May 02, 2018
A
Best answer Hello Sarah, thank you for your question. Unfortunately no our formaldehyde detector does not have a data logger and you are also not able to plug it into a computer to review the results.
Reply Deelat Industrial on May 03, 2018
Q
What probe frequency should be used to measure plastics that are 25 mm thick?Chris A. on Jun 29, 2016
A
Best answer Thank you for your question! The manufacturer of this ultrasonic thickness gauge recommends the probe frequency be set at 5MHz to measure plastics of 25mm thickness. We always recommend using the auto calibration feature to calibrate the gauge before use to insure the most accurate reading.
Reply Deelat Industrial on Jun 30, 2016