Do you have a CAD model for this tool? I need to know the width of the head for clearances. If I'm looking down at the hex opening I would like to know the distance across the entire head?

Do you have a 12 point 9/16 pneumatic wrench and or could you produce one. If yes when?

We can get a 12-point, 9/16th pneumatic wrench. Lead time would be 1 week. Please call to get pricing.

What is the equivalent size of this wrench in standard measurement?

The equivalent of 14mm in standard measurement is 9/16.

I just received a D1151458 Pneumatic Air Impact Wrench. It came with a parts list but not an operations manual. How do I obtain that manual?

We sincerely apologize that our pneumatic air impact wrench did not come with the operations manual. We can certainly provide one for you however cannot do it through our Q&A section. Please contact our customer support team via phone or email and we will make sure to provide any information on our pneumatic air impact wrench you need.

What is the overall length, width, and thickness of head at hex of D1170757? This information is important when choosing this type of tool.

The length of D1170757 is 115mm, the width is 33.2mm, and the thickness of head at hex is 18mm.

Is the torque settable? What is the repeatability on the torque? Is the direction reversible? Will the hex head of a fastener slip all the way through the socket, or does the socket have a feature that allows it to bottom out?

The torque is settable and the max torque for this pneumatic ratchet wrench is 10 nm. The direction is certainly reversible by pressing the switch on the bottom of the air wrench. The hex head will slip through all the way out.

Does this come with a 12 point end? or is it just 6 point?

Our factory could produce a 12 point end for this pneumatic wrench with an extra cost of $42. However, a 12 point end can reduce the life this wrench, as the contact surface will be reduced.

Are there any replacement parts available? Also, is there a socket available that comes with the side plates?

Yes, all replacement parts can be re-ordered. There should be a detail parts list inside the packing box. Please call our sales team at 1-888-667-5776 or email at sales@deelat.com for assistance.

Hi, is there a 7/16" available for 1/4" nuts.

At the moment we do not offer a 7/16".

Hello, can I adjust this to 2-3 nm? if not, let me now which one I can use for adjusting to 2-3 nm to 10 nm, thanks for your help.

This pneumatic wrench has a maximum of 10nm and this cannot be adjusted. We suggest that you use a torque control type of wrench, such as our SKU D1151515.

What are the box end dimensions? Thickness? Outside radius?

The packaging box dimensions are 35.2x9.5x6.5cm. If you are asking about the hex end of the tool, the full measurements are: length is 115mm, the width is 33.2mm, and the thickness of head at hex is 18mm. The largest radius of the tool is 52.5mm.

Hello do you know the tool's head width?

The tool's head width is 2.5 centimeters, or roughly 1 inch.

Is this a stall type or clutch motor?

The pneumatic wrench is not a stall type or clutch motor. It is driven by gears and uses a trigger.

What is the height of the head? How much tolerance is needed between the top of the bolt, and the bottom of the surface above it?

Is there a torque range on this product?

Under air pressure 90psi, 6.2bar, 6.3kg/cm², working torque is 10Nm / 7ft-lb, range is ±10%.

Is there a 7/16", 10NM version of this tool?

We do not carry a 7/16" 10nM version of this pneumatic wrench. The closest we can get is an 12mm tool, which is approximately 15/32". Please contact us for more information.

Do you have a air driven 1/2" drive pneumatic impact ratchet

DEELAT sells a 1/2" Pneumatic Impact Ratchet Wrench. You can find it on our website using SKU# D1774295.

Do you offer any tooling or adapters for this air tool?

We do not have adapters for this pneumatic air impact ratchet wrench as it is designed to be used in tight spaces.

Can i get this tool with a hex size for an M8 nut?

No, this pneumatic wrench cannot use an M8 size. It can only use 10mm, 12mm, 13mm, 14mm, 1/2" or 9/16".

How do I get repair parts for this wrench?

I have a question about SKU #D1151459 Pneumatic ratchet. I see that it comes as 14mm, but is it possible to get different sizes? I need one that is 3/8"

DEELAT sells a pneumatic impact wrench that is 3/8". Please take a look at our SKU# D1166808.

What are the dimensions of the nose- height length- Main body of Diameter of Ratchet?

Please see the spec sheet that is now attached to this product page for the dimensions of the Pneumatic Air Impact Ratchet Wrench.

What is the width of the tool head for the 8mm size tool, D1151454?

The width of the tool head for this D1151454 pneumatic wrench is 13.2mm.

Do you have a pneumatic air impact rachet wrench for 9/16" hex. nut?

At the moment we do not offer a air impact wrench with a 9/16" hex. However, we are in the process of developing one for all our customers. Please check back with us in a month or so.

What is the thickness of the tool at the hex end? Is the torque adjustable and reliable to keep at a calibrated setpoint?

At the hex end, the tool is 18 millimeters thick. The torque power is fixed.

How is the torque output adjusted on D1774295? What is the tolerance?

The torque output cannot be adjusted on this D1774295 pneumatic wrench. Its max torque is 25Nm (18 ft-lb), and its working torque is 15Nm (11ft-lb).