Air Tapping Gun - M3 - 100 RPM
Air Tapping Gun – M3 – 100 RPM
The air tapping gun has a tapping capacity of M3 along with a freeload speed of 100 RPMs. The overall length of the unit is 310 mm.
The pneumatic gun is powered via air pressure fed into the bottom of the tool. The pneumatic tool is used for the process of creating threads, specifically the nut, which is the female portion of the mating pair. Whenever the tap is properly aligned with a pre-formed hole, the trigger activates the gun, cutting the threads as required.
This pneumatic tool can be used in automotive, industrial and engineering applications, and in general for any environment where tapping is necessary.
|Free Load Speed:||100 RPM|
|Air Consumption:||226 L / Min|
|Overall Length:||310 mm|
|Air Inlet:||P.T 1/4"|
|Sound Level:||87 dB(A)|