Pneumatics and Vehicle Maintenance
Browse category navigation
Featured Products
Pneumatic/Hydraulic Riveter Gun - 1/4"– 3 Jaws The pneumatic nut riveter gun has a rivet capacity of 3/32” to ¼” (2.4 to 6.4 mm) and the air consumption is 4.2 CFM. The tool has 3 jaws, and its total weight is 2 kg. Function The pneumatic nut riveter gun uses a hydraulic system and is powered via air pressure fed into the bottom of the tool. A rivet is inserted into the head of the riveter, and the tool is then aimed at a predrilled hole. Once the head is aligned with the hole, the riveter is triggered and immediately locks the mandrel to the body, cuts the mandrel, and deploys the rivet, creating a secure bond. Applications The pneumatic nut riveter gun is ideal for any context in which rivets are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and woodworking. The pneumatic function makes the tool especially useful for cases where installing many rivets is required.
Pneumatic Riveter – 1/4", 700 RPM - Quick Change The rivet tool has a head size of 1/4" and a freeload speed of 700 RPMs. The overall length of the tool is 200 mm, and the tool utilizes a quick change head design for swapping mandrel sizes. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.
Pneumatic Riveter – 3/8", 450 RPM The rivet tool has a head size of 3/8” and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.
Vehicle Lighting Show all 77 products
Brake Light Bulb - P21/4W-566 This single brake light bulb is type P21/4W-566 and features 12V voltage and 21/4W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that indicates...
Brake Light Bulb - P21/5W-380 This single brake light bulb is type P21/5W-380 and features 12V voltage and 21/5W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that indicates...
Brake Light Bulb - PR21/5W-380R This single brake light bulb is type PR21/5W-380R and features 12V voltage and 21/5W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that...
Brake Light Bulb - PR21W-382R This single brake light bulb is type PR21W-382R and features 12V voltage and 21W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that indicates...
Brake Light Bulb - R10W-245 This single brake light bulb is type R10W-245 and features 12V voltage and 10W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that indicates to...
Brake Light Bulb - R5W-207 This single brake light bulb is type R5W-207 and features 12V voltage and 5W wattage. Function The brake light bulb is installed into the brake light of a vehicle, which then provides a light that indicates to other...
Stepper Motors Show all 40 products
Stepper Motor – 3-Phase - 4.43 ft lbs, 5.31" Length The stepper motor is 3-phase with a holding torque of 4.43 ft lbs, and the overall length of the unit is 5.31". The stepper motor also has a splashproof construction. Function The step motor...
Stepper Motor - 0.14 ft lb - 1.34" Length - .2" Shaft The stepper motor is 1.1 lbs with a holding torque of 0.14 ft lb, and the overall length of the unit is 1.34". The shaft is .2" long. The stepper motor also has a splashproof construction....
Stepper Motor - 0.14 ft lbs- 1.34" Length - .31" Shaft The stepper motor is 1.1 lbs with a holding torque of 0.14 ft lbs, and the overall length of the unit is .31". The stepper motor also has a splashproof construction. Function The step...
Stepper Motor – 2-Phase - .33 ft lbs, 1.61" Length The stepper motor is 2-phase with a holding torque of .33 ft lbs, and the overall length of the unit is 1.61". The stepper motor also has a splashproof construction. Function The step motor...
Stepper Motor – 2-Phase - .89 ft lbs, 2.99" Length The stepper motor is 2-phase with a holding torque of .89 ft lbs, and the overall length of the unit is 2.99". The stepper motor also has a splashproof construction. Function The step motor...
Stepper Motor – 2-Phase - 0.59 ft lbs, 2.2" Length The stepper motor is 2-phase with a holding torque of 0.59 ft lbs, and the overall length of the unit is 2.2". The stepper motor also has a splashproof construction. Function The step motor...
Pneumatic Air Cutters Show all 9 products
Pneumatic Air Cutter (2.0 mm, 2.6 mm) The pneumatic shear has a cutting capacity on iron wire of 2.0 mm and on copper wire of 2.6 mm. It uses an S5 blade and has an air consumption of 230 cubic cm/min. Function The pneumatic air cutter is fed...
Pneumatic Air Cutter (2.8 mm, 3.3 mm) The pneumatic shear has a cutting capacity on iron wire of 2.8 mm and on copper wire of 3.3 mm. It has an air consumption of 230 cubic cm/min. Function The pneumatic air cutter is fed air from the bottom...
Pneumatic Air Cutter (0.5 mm, 1 mm) The pneumatic shear has a cutting capacity on iron wire of 0.5 mm and on copper wire of 1 mm. It has an air inlet of P.T 1/4" and has an air consumption of 28 L/min. Function The pneumatic air cutter is fed...
Pneumatic Air Cutter for Plastics (5.0 mm, 7.0 mm) The pneumatic shear has a cutting capacity on hard plastic of 5.0 mm and on soft plastic of 7.0 mm. It uses an FD-6 blade and has an air consumption of 112 l/min (4 CFM). Function The...
Pneumatic Air Cutter (1.0 mm, 1.6 mm) The pneumatic shear has a cutting capacity on iron wire of 1.0 mm and on copper wire of 1.6 mm. The air inlet is P.T 1/4" and the unit has an air consumption of 230 cubic cm/min. Function The pneumatic...
Replacement Blade for Pneumatic Air Cutter (2.0 mm, 2.6 mm, D1158643) The replacement blade for the pneumatic shear has a cutting capacity of 2.0 mm and 2.6 mm and is intended for use with product D1158643. Function The replacement blade is...
Tire Chains Show all 29 products
Tire Chain - KN100 - 5 Pairs This tire chain is type KN100, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Tire Chain - KN110 - 5 Pairs This tire chain is type KN110, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Tire Chain - KN120 - 5 Pairs This tire chain is type KN120, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Tire Chain - KN130 - 5 Pairs This tire chain is type KN130, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Tire Chain - KN20 - 5 Pairs This tire chain is type KN20, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Tire Chain - KN30 - 5 Pairs This tire chain is type KN30, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Replacement Parts Show all 11 products
Ball Bearing for 1000 RPM – Quick Change - Rivet Nut Setter Replacement Ball Bearing for the 1000 RPM Quick Change Series Rivet Nut Setter. Specifically, it is compatible with D1774131, D1774132, D1774134, and D1774135. Function The head...
Air Hammer Show all 24 products
Air Hammer - 3-7/8" Stroke x 8.9" Length - 2200 BPM This air hammer has a piston stroke of 3-7/8" and an overall length of 8.9". It has 2200 BPM. Function The air hammer is powered via air pressure fed into the bottom of the unit. When the...
Air Hammer - Kit - 50 Piece - 6" Length This air hammer has an overall length of 6". The kit features a total of 50 different tool pieces, which are listed below. Function The air hammer is powered via air pressure fed into the bottom of the...
Air Hammer - Kit - 7 Piece - 2.6" Stroke x 7" Length - 3200 BPM This air hammer has a piston stroke of 2.6" and an overall length of 7". It has 3200 BPM. The kit features a total of 7 different tool pieces, including a blow case, a 7.5" air...
Air Hammer - Kit - 7 Piece - 4" Stroke x 7" Length - 2200 BPM This air hammer has a piston stroke of 4" and an overall length of 7". It has 2200 BPM. The kit features a total of 7 different tool pieces, including a blow case, a 10" air hammer,...
Air Hammer - Kit - 71 Piece - 6" Length This air hammer has an overall length of 6". The kit features a total of 71 different tool pieces, which are listed below. Function The air hammer is powered via air pressure fed into the bottom of the...
Air Hammer - Kit - 9 Piece - Round/Hex - 6" Length This air hammer has an overall length of 6". The kit features a total of 9 different tool pieces, including the hammer, 4 5" round/hex shank chisels, a spring retainer, a 1/4" NPT male...
Pneumatic Riveters Show all 25 products
Pneumatic Riveter – M3, 2700 RPM The rivet tool has a head size of M3 and a freeload speed of 2700 RPMs. The overall length of the tool is 230 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...
Pneumatic Riveter – 3/8", 450 RPM The rivet tool has a head size of 3/8” and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...
Pneumatic Riveter – 1/4", 1000 RPM - Quick Change The rivet tool has a head size of 1/4" and a freeload speed of 1000 RPMs. The overall length of the tool is 205 mm, and the tool utilizes a quick change head design for swapping mandrel sizes....
Pneumatic Riveter – M8, 450 RPM The rivet tool has a head size of M8 and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...
Pneumatic Riveter – 1/4", 700 RPM - Quick Change The rivet tool has a head size of 1/4" and a freeload speed of 700 RPMs. The overall length of the tool is 200 mm, and the tool utilizes a quick change head design for swapping mandrel sizes....
Pneumatic Riveter – M10, 450 RPM The rivet tool has a head size of M10 and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...
Pneumatic Wrenches Show all 33 products
Pneumatic Wrench - 1/2" - 250 RPM, 25 N.m The air wrench has a hex size of 1/2 inch. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the...
Pneumatic Wrench - 9/16" - 250 RPM, 25 N.m The air wrench has a hex size of 9/16". The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic Wrench - 13mm - 250 RPM, 25 N.m The air wrench has a hex size of 13 mm. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic Wrench - 14mm - 250 RPM, 25 N.m The air wrench has a hex size of 14 mm. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic Wrench - 17mm - 150 RPM, 90 N.m The air wrench has a hex size of 17 mm. The tool has a maximum torque of 90 N.m and a freeload speed of 150 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic Wrench - 3/8" - 180 RPM, 10 N.m The air wrench has a hex size of 3/8". The tool has a maximum torque of 10 N.m and a freeload speed of 180 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic / Hydraulic Nut Riveter Guns Show all 10 products
Pneumatic/Hydraulic Riveter Gun - 1/4"– 3 Jaws The pneumatic nut riveter gun has a rivet capacity of 3/32” to ¼” (2.4 to 6.4 mm) and the air consumption is 4.2 CFM. The tool has 3 jaws, and its total weight is 2 kg. Function The pneumatic nut...
Pneumatic/Hydraulic Riveter Gun - 3/32", 1/8", 5/32", 3/16" (2.4 mm, 3.2 mm, 4 mm, 4.8 mm) The pneumatic nut riveter gun has rivet capacity settings of 3/32”, 1/8”, 5/32”, 3/16” (2.4, 3.2, 4, 4.8 mm) and the air consumption is 170 L/min. The...
Pneumatic/Hydraulic Riveter Gun - 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" (2.4 mm, 3.2 mm, 4 mm, 4.8 mm, 5.6 mm, 6.4 mm) The pneumatic nut riveter gun has rivet capacity settings of 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, ¼” and the air consumption is...
Pneumatic/Hydraulic Riveter Gun – 1/4", 1200 RPM The pneumatic/hydraulic riveter gun has rivet settings of 1/4" and the free load speed is 1200 RPMs. The overall length of the tool is 278 mm. Function The pneumatic/hydraulic riveter gun uses...
Pneumatic/Hydraulic Riveter Gun - 2.4 mm, 3.2 mm, 4 mm, 4.8 mm - 3 Jaw - Blue The pneumatic nut riveter gun has nose pieces supporting rivet capacities of 2.4, 3.2, 4, and 4.8 mm. The air consumption is 1.4 L/min, and the tool has 3 jaws. The...
Pneumatic/Hydraulic Riveter Gun - 2.4 mm, 3.2 mm, 4 mm, 5 mm - 2 Jaw - Black The pneumatic nut riveter gun has nose pieces supporting rivet capacities of 2.4 mm, 3.2 mm, 4 mm, and 5 mm. The air consumption is 4 CFM, and the tool has 2 jaws. The...
Pneumatic Shears Show all 4 products
Pneumatic Shear - Cutting Capacity 5/100"-6/100" Deelat’s pneumatic shears feature an air inlet of 1/4" and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 5/100"-6/100". Function The pneumatic...
Pneumatic Shear – Cutting Capacity 1.9mm Deelat’s pneumatic shears feature an air inlet of 1/4" and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 7/100". Function The pneumatic shears are powered...
Pneumatic Shear – Cutting Capacity 7/32” Deelat’s pneumatic shears feature an air inlet of 1/4” and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 7/32”. Function The pneumatic shears are powered...
Pneumatic Shear – Cutting Capacity 9/100" Deelat’s pneumatic shears feature an air inlet of 1/4" and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 7/32”. Function The pneumatic shears are powered...