O Rings- Buna-N - Dimensions 110.72x3.53 mm - Qty. 5
Open For Business & Shipping Daily During COVID-19
O Rings – Buna-N – Dimensions 110.72x3.53 mm – Qty. 5
This o ring material is Buna-N, or nitrite rubber. Its dimensions are 110.72x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand temperatures of up to 130 degrees Celsius.
The o ring is situated in a groove between two or more parts and is then compressed, creating a seal.
This o ring material is ideal for a number of different plumbing applications, such as use with engine oil, gear oil, machine oil, lubricating oil and more.
|Inner Diameter:||110.72 mm|
|Cross Section (C/S):||3.53 mm|
|Material:||NBR ( Nitrile Rubber)|
|Resistant to oil, water abrasion , high pressure oil|
|Not resistant to extreme solvent|
|Highest applicable temp:||130|
|Embrittlement Temp:||-10 - 20|
|Temperature Range:||-25 - 100|
|Hardness Range:||15 -100|
|Usual Application:||Seal parts for fuel oil tank , hydraulic oil, silicone grease, water|
|Excellent use for:||Engine Oil, Gear Oil , Machine Oil, Shaft Lubricating oil , Butter/ Grease , Lithium Oil , Phenyltrimethicone, Alcohol , Caustic acid 30 %|
|Good use for:||Freezing machine oil , Water , Hot Water , Steam, Non- freezing water , Sulfuric acid 30 % , Ethanol, LPG, Coal Gas , Freon 12|
|Fair use for:||ozone, Light Oil , Lamp- Oil , Heavy Oil , Gasoline|
|Not recommend to use for:||Nitric acid 10% , Benzene, Trichloro ethylene, Ether, Ketone, Ethyl acetate|