Threaded Flange - Nominal Pipe Size 1/2" - Class 150 - RaisedFace - Stainless Steel - F316/316L
Threaded Flange – Nominal Pipe Size 1/2” – Class 150 - Raised Face – Stainless Steel – F316/316L
The screw-on flange's nominal pipe size is 1/2” with a total diameter of 3.5”. It has a pressure class rating of 150 and has 4 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a thickness of 0.6225”.
The threaded flange is very similar in function to the slip-on flange however it allows for a pipe to be screwed in without the need for welding and therefore has a bore that is larger than the outer diameter of the pipe. The threaded flange is used in low pressure systems that are run in normal temperatures.
The screw-on flange is used in pipeline applications where liquid or gas is transported from one location to another. The pipe used must be of a certain thickness to be used with this flange. Best used in applications where welding is dangerous.
|Nominal Pipe Size:||1/2"|
|Number of Bolt:||4|
|Overall Diameter:||3.5 inch|
|Overall Thickness:||0.6225 inch|