orders over $400
Plumbing
Browse category navigation
Featured Products
Submersible Electric Sump Pump - Max Head 110 FT - Max Flow 35 GPM - Single Phase - 1 HP - 110V The submersible electric sump pump has a single-phase motor, a 1 inch outlet, and 35 GPM capacity at a max head (delivery height) of 110FT. Function The submersible pump, when fully submerged in water (like in the case of a flooded basement) pulls water into the intake where the impeller propels it through a diffuser and pumps the water to the surface. Free-moving float switch can be set to a pre-set depth, so that the pump turns on when water levels rise above the pre-set level, which protects your home from flooding. The pump turns off automatically when water levels in the basement systems or other areas are below the pre-set level. Applications The submersible pump can be used for flood protection in basement systems, wells, aquariums, sump basins, fountains, irrigation systems, sewage treatment, or anywhere where you need to keep water levels from rising.
Motorized Electric Ball Valve - 2-Way AC - 3/4", 3.5N.m, Stainless Steel, 110V - ON/OFF The motorized electric ball valve consists of a 2-Way 3/4” stainless steel valve, has a 3.5N.m operating torque and the actuator requires AC110V power. It also consists of an on/off type actuator. Function These actuated valves act as a vessel for liquids and gas to flow through, allowing the valve to be fully open or fully closed. The valve is operated by the actuator, which is connected to your power source. Application The actuated valves can be used in a range of plumbing set-ups, as well as vehicle heating and cooling systems.
Motorized Electric Ball Valve - 2-Way AC - 1/2", 3.5N.m, Stainless Steel, 110 V - On/Off The motorized electric ball valve consists of a 2-Way 1/2” stainless steel valve, has 3.5N.m operating torque and the actuator requires AC110V power. It also consists of an on/off type actuator. Function These actuated valves act as a vessel for liquids and gas to flow through, allowing the valve to be fully open or fully closed. The valve is operated by the actuator, which is connected to your power source. Application The actuated valves can be used in a range of plumbing set-ups, as well as vehicle heating and cooling systems.
Sump Pumps Show all 5 products
Submersible Electric Sump Pump - Max Head 110 FT - Max Flow 35 GPM - Single Phase - 1 HP - 110V The submersible electric sump pump has a single-phase motor, a 1 inch outlet, and 35 GPM capacity at a max head (delivery height) of 110FT....
Submersible Electric Sump Pump - Max Head 59 FT - Max Flow 22 GPM - Single Phase - 0.5 HP - 110V The submersible electric sump pump has a single-phase motor, a 1 inch outlet, and 22 GPM capacity at a max head (delivery height) of 59 FT....
Submersible Electric Sump Pump - Max Head 98 FT - Max Flow 46 GPM - Single Phase - 1.5 HP - 220V The submersible electric sump pump has a single-phase motor, a 2 inch outlet, and 46 GPM capacity at a max head (delivery height) of 98 FT....
Submersible Electric Sump Pump - Max Head 32 FT - Max Flow 220 GPM - Single Phase - 1.5 HP - 110V The submersible electric sump pump has a single-phase motor, a 3 inch outlet, and 220 GPM capacity at a max head (delivery height) of 32 FT....
Submersible Electric Sump Pump - Max Head 65 FT - Max Flow 55 GPM - Single Phase - 1 HP - 110V The submersible electric sump pump has a single-phase motor, a 2 inch outlet, and 55 GPM capacity at a max head (delivery height) of 65 FT. Function...
Deep Well Submersible Pumps Show all 24 products
Deep Well Pump (Submersible) - 124' 8 1/16" Max. Head Height - 1848 GPH The deep well pump is submersible, and is single phase with 1 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Deep Well Pump (Submersible) - 616' 9 9/16" Max. Head Height - 1188 GPH The deep well pump is submersible, and is single phase with 3 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Deep Well Pump (Submersible) - 104' 11 27/32" Max. Head Height - 1584 GPH The deep well pump is submersible, and is single phase with 0.5 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Deep Well Pump (Submersible) - 164' 1/2" Max. Head Height - 1188 GPH The deep well pump is submersible, and is single phase with 0.5 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Deep Well Pump (Submersible) - 177' 1 31/32" Max. Head Height - 1188 GPH The deep well pump is submersible, and is three phase with 0.75 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Deep Well Pump (Submersible) - 183' 8 23/32" Max. Head Height - 1848 GPH The deep well pump is submersible, and is single phase with 1.5 horsepower. The water pump is constructed out of corrosion-resistant materials. Function The open well...
Vacuum Pumps Show all 32 products
Rotary Vane Vacuum Pump - 3/4HP - 1720RPM - 240L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 3/4HP, 1720rpm, and pumps 240L/min. It comes in a dark blue color....
Rotary Vane Vacuum Pump - 1/2HP - 3500RPM - 120L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 1/2HP, 3500rpm, and pumps 120L/min. It comes in a dark blue color....
Rotary Vane Vacuum Pump - 1/3HP - 1720RPM - 120L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 1/3HP, 1720rpm, and pumps 120L/min. It comes in a dark blue color....
Rotary Vane Vacuum Pump - 1/3HP - 1720RPM - 90L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 1/3HP, 1720rpm, and pumps 90L/min. It comes in a dark blue color....
Rotary Vane Vacuum Pump - 1/3HP - 2800RPM - 90L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 1/3HP, 2800rpm, and pumps 90L/min. It comes in a dark blue color....
Rotary Vane Vacuum Pump - 1/3HP - 3500RPM - 60L/Min Deelat vacuum pumps have a powerful motor and high oil capacity, and are CE certified. The vacuum pump is rotary vane, 1/3HP, 3500rpm, and pumps 60L/min. It comes in a dark blue color....
O-Rings Show all 276 products
O Rings – Buna-N – Dimensions 104.37x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 104.37x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
O Rings – Buna-N – Dimensions 107.54x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 107.54x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
O Rings – Buna-N – Dimensions 110.72x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 110.72x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
O Rings – Buna-N – Dimensions 113.89x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 113.89x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
O Rings – Buna-N – Dimensions 117.07x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 117.07x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
O Rings – Buna-N – Dimensions 120.24x3.53 mm – Qty. 5 This o ring material is Buna-N, or nitrite rubber. Its dimensions are 120.24x3.53 mm, and five o rings are included. It is resistant to oil, water abrasion and high pressure oil. It can stand...
Wall Mounted Drinking Fountains Show all 6 products
Wall Mounted Drinking Fountain - 16.1" x 14.8" x 5.2" The fountain is made of stainless steel, features a single tap, and has a basin with a diameter of 14.8". The fountain's total size is 16.1" x 14.8" x 5.2" Function The wall mounted...
Wall Mounted Drinking Fountain - 16.1" x 14.8" x 5.2" The fountain is made of stainless steel, features a single tap, and has a basin with a diameter of 14.8". The fountain's total size is 16.1" x 14.8" x 5.2". Function The wall mounted...
Wall Mounted Drinking Fountain - 16.9" x 12.6" x 40.6" The fountain is made of stainless steel, and features a single tap. The fountain's total size is 16.9" x 12.6" x 40.6". Function The wall mounted drinking fountain is placed in a...
Wall Mounted Drinking Fountain - 18.4" x 19" x 20.5" The fountain is made of stainless steel, and features a single tap and three actuators. The fountain's total size is 18.4" x 19" x 20.5". Function The wall mounted drinking fountain is...
Wall Mounted Drinking Fountain - Point of Use - Mechanical - 22.4" x 13.6" x 18.5" The fountain is made of stainless steel, and features both hot and cold drinking water features and a 4 stage UF filtration system. The fountain's total size is...
Wall Mounted Drinking Fountain - Point of Use - Touch Screen - 22.4" x 13.6" x 18.5" The fountain is made of stainless steel, and features both hot and cold drinking water features and a 4 stage UF filtration system. The fountain's total size is...
Blind Flanges Show all 246 products
Blind Flange – Nominal Pipe Size 2-” – Class 150 – Raised Face - Stainless Steel - F304/304L This solid flange's nominal pipe size is 2” with a total diameter of 6”. It has a pressure class rating of 150 and has 4 bolt holes. It is made of AMSE...
Blind Flange - Nominal Pipe Size 4" - Class 2500 This solid flange's nominal pipe size is 4” with a total diameter of 14”. It has a pressure class rating of 2500 and has 8 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a thickness of...
Blind Flange - Nominal Pipe Size 2-1/2" - Class 300 This solid flange's nominal pipe size is 2-1/2” with a total diameter of 7.5”. It has a pressure class rating of 300 and has 8 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a...
Blind Flange - Nominal Pipe Size 3/4" - Class 150 This solid flange's nominal pipe size is 3/4” with a total diameter of 3.875”. It has a pressure class rating of 150 and has 4 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a...
Blind Flange - Nominal Pipe Size 1/2" - Class 900 This solid flange's nominal pipe size is 1/2” with a total diameter of 4.75”. It has a pressure class rating of 900 and has 4 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a...
Blind Flange - Nominal Pipe Size 1-1/2" - Class 150 This solid flange's nominal pipe size is 1-1/2” with a total diameter of 5”. It has a pressure class rating of 150 and has 4 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a...
Outdoor Fountains Show all 12 products
Outdoor Drinking Fountain - 14.2" (Diameter) x 38.6" (Height) - Square The outdoor drinking fountain is made of stainless steel, features a single tap, and has a basin with a diameter of 14.2". The fountain is 38.6" high and has a square...
Outdoor Drinking Fountain - 14.6" x 12.6" x 40.6" The outdoor drinking fountain is made of stainless steel, features one tap, and has dimensions of 14.6" x 12.6" x 40.6". Function The outdoor water fountain is placed in a convenient area to...
Outdoor Drinking Fountain - 14.8" (Diameter) x 38.6" (Height) - Round The outdoor drinking fountain is made of stainless steel, features a single tap, and has a basin with a diameter of 14.8". The fountain is 38.6" high and has a round base....
Outdoor Drinking Fountain - 4 Taps - 53.1" x 54.3" x 74.8" The outdoor drinking fountain is made of stainless steel, features four taps, and has dimensions of 53.1" x 54.3" x 74.8". Function The outdoor water fountain is placed in a...
Outdoor Drinking Fountain - 9.1" x 14.8" x 40.9" The outdoor drinking fountain is made of stainless steel, features a single tap, and has dimensions of 9.1" x 14.8" x 40.9". Function The outdoor water fountain is placed in a convenient area...
Outdoor Drinking Fountain - Double Basin - 30.7" x 12.2" x 35.4" The outdoor drinking fountain is made of stainless steel, features two taps, and has dimensions of 30.7" x 12.2" x 35.4". Function The outdoor water fountain is placed in a...
Weld Neck Flanges Show all 288 products
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 12" in size with a 19" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5 standards....
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 1-1/2" in size with a 5" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5...
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 10" in size with a 16" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5 standards....
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 12" in size with a 19" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5 standards....
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 3" in size with a 7.5" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5 standards....
For use as a covering or to close the end of a pipe, this stainless steel weld neck flange is 4" in size with a 9" diameter, and has a pressure class rating of 150. This is a high quality pipe flange that is constructed to AMSE B 16.5 standards....
Urinals Show all 20 products
Urinal - Stainless Steel - Top Spud - 20.3" x 14.4" x 15.2" The wall-mounted urinal has a size of 20.3" x 14.4" x 15.2", and its material is stainless steel. The fixture uses a gravity flushing method and has a top spud location. Function...
Urinal - Stainless Steel - Top Spud - 19.3" x 13.8" x 11.4" The wall-mounted urinal has a size of 19.3" x 13.8" x 11.4", and its material is stainless steel. The fixture uses a gravity flushing method and has a top spud location. Function...
Urinal - Ceramic - Back Spud - 13" x 12.2" x 27.6" The wall-mounted urinal has a size of 13" x 12.2" x 27.6", and its material is white ceramic. The fixture uses a gravity flushing method and has a back spud location. Function The...
Urinal - Ceramic - Back Spud - 13" x 14.2" x 25.6" The wall-mounted urinal has a size of 13" x 14.2" x 25.6", and its material is white ceramic. The fixture uses a gravity flushing method and has a back spud location. Function The...
Urinal - Ceramic - Back Spud - 13" x 15.7" x 29.9" The wall-mounted urinal has a size of 13" x 15.7" x 29.9", and its material is white ceramic. The fixture uses a gravity flushing method and has a back spud location. Function The...
Urinal - Ceramic - Back Spud - 18.9" x 12.2" x 28" The wall-mounted urinal has a size of 18.9" x 12.2" x 28", and its material is white ceramic. The fixture uses a gravity flushing method and has a back spud location. Function The...
Threaded Flanges Show all 31 products
Threaded Flange – Nominal Pipe Size 1-1/2” – Class 150 - Raised Face – Stainless Steel – F304/304L The screw-on flange's nominal pipe size is 1-1/2” with a total diameter of 5”. It has a pressure class rating of 150 and has 4 bolt holes. It is...
Threaded Flange – Nominal Pipe Size 1-1/4” – Class 150 - Raised Face – Stainless Steel – F304/304L The screw-on flange's nominal pipe size is 1-1/4” with a total diameter of 4.62”. It has a pressure class rating of 150 and has 4 bolt holes. It...
Threaded Flange – Nominal Pipe Size 1-1/4” – Class 150 - Raised Face – Stainless Steel – F316/316L The screw-on flange's nominal pipe size is 1-1/4” with a total diameter of 4.62”. It has a pressure class rating of 150 and has 4 bolt holes. It...
Threaded Flange – Nominal Pipe Size 1-1/4” – Class 300 - Raised Face – Stainless Steel – F304/304L The screw-on flange's nominal pipe size is 1-1/4” with a total diameter of 5.25”. It has a pressure class rating of 300 and has 4 bolt holes. It...
Threaded Flange – Nominal Pipe Size 1” – Class 150 - Raised Face – Stainless Steel – F304/304L The screw-on flange's nominal pipe size is 1” with a total diameter of 4.25”. It has a pressure class rating of 150 and has 4 bolt holes. It is made...
Threaded Flange – Nominal Pipe Size 1” – Class 150 - Raised Face – Stainless Steel – F316/316L The screw-on flange's nominal pipe size is 1” with a total diameter of 4.25”. It has a pressure class rating of 150 and has 4 bolt holes. It is made...