Industrial Exhaust Fan - Wall Mount - 35" - Belt Drive
Certification
Volume discounts available
| Quantity | 5 units | 7 units | 10 units | 25 units | 50 units |
| Discount | 2% off | 3% off | 5% off | 8% off | 10% off |
General Description
Industrial Exhaust Fan - Wall Mount - 35" - Belt Drive
The wall mount industrial exhaust fan has a 35 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor that has a maximum speed of 610 revolutions per minute.
Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. The fan is typically installed so that it hangs from the ceiling.
Applications
The fan is intended for use in barns and other structures that house bovine animals.
Technical Details
| Certifications: | CE |
|---|---|
| Type: | Wall Mount |
| Drive: | Belt Drive |
| Size: | 39.4*39.4*13.8" |
| Diameter: | 35.4" |
| Fan Speed: | 560 rpm |
| Air Volume: | 15,715 CFM |
| Air Pressure: | 60 Pa |
Do you have a question about this product?
Industrial Exhaust Fan - Wall Mount - 55" - Belt Drive The wall mount industrial exhaust fan has a 55 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...
Industrial Exhaust Fan - Push-Pull Centrifugal - 43" The push-pull centrifugal industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...
Industrial Exhaust Fan - Heavy Hammer - 40" The heavy hammer industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...
Industrial Exhaust Fan - Wall Mount - 40" The wall mount industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt...
Industrial Exhaust Fan - Wall Mount - 28" - Belt Drive The wall mount industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...
Industrial Exhaust Fan - Wall Mount - 50" - Belt Drive The wall mount industrial exhaust fan has a 50 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...
Pneumatic Wrench - 14mm - 250 RPM, 25 N.m The air wrench has a hex size of 14 mm. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Industrial Exhaust Fan - Wall Mount - 43" - Belt Drive The wall mount industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...
Industrial Exhaust Fan - Standard - 40" The standard industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt three...
Industrial Exhaust Fan - Push-Pull Centrifugal - 40" The push-pull centrifugal industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...
Industrial Exhaust Fan - Heavy Hammer - 35" The heavy hammer industrial exhaust fan has a 35 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...
Motorized Electric Ball Valve - 2-Way AC - 1/2", 3.5N.m, Stainless Steel, 110 V - On/Off The motorized electric ball valve consists of a 2-Way 1/2” stainless steel valve, has 3.5N.m operating torque and the actuator requires AC110V power. It...