Customer Support
Call us toll free!
1-888-667-5776
Industrial Exhaust Fan - Push-Pull Centrifugal - 28"
General Description
Industrial Exhaust Fan - Push-Pull Centrifugal - 28"
The push-pull centrifugal industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor that has a maximum speed of 560 revolutions per minute.
Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. The fan's ligature is a push-pull centrifugal device that opens the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and closes the shutter when the fan is off.
Applications
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.
Technical Details
Certifications: | CE |
---|---|
Type: | Push-Pull Centrifugal |
Size: | 31.9*31.9*17.7" |
Diameter: | 28" |
Fan Speed: | 560 rpm |
Air Volume: | 10,418 CFM |
Air Pressure: | 55 Pa |
Noise: | less than 65 dB |

Do you have a question about this product?
Receive $5 off your purchase simply for asking a question! Ask us anything! In fact, we use questions asked on our website about our products to further inform future customers, so we want you to leave a question. In addition, you will automatically be entered in our monthly $100 giveaway when you ask a question!
Click for details »
If you need an answer to your question immediately, please call our friendly CUSTOMER SUPPORT.
can this be mounted on the roof?
Hi Joe, thanks for your question. This product is typically wall-mounted and is therefore not designed to be mounted on the roof. If you have any other questions or concerns please do not hesitate to contact us.
Can I get this in single phase?
Yes, this industrial exhaust fan is available in single phase.