Industrial Exhaust Fan - Heavy Hammer - 50"

SKU #D1143840

Certification

Placeholder
CE certified
Buy this product
 

Price
$53650
Quantity
 

Payment Methods

Payment Methods

Volume discounts available

Quantity 5 units 7 units 10 units 25 units 50 units
Discount 2% off 3% off 5% off 8% off 10% off
$1 donation

General Description

Industrial Exhaust Fan - Heavy Hammer - 50"


The heavy hammer industrial exhaust fan has a 50 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor that has a maximum speed of 440 revolutions per minute.

Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. A heavy hammer fan has two hammers at the bottom of the fan to open and close the blinds. The fan's hammers open the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and close the shutter when the fan is off.

Applications
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.

Technical Details

Certifications: CE
Type: Heavy Hammer
Size: 54.5*54.5*15.7"
Diameter: 49.2"
Fan Speed: 440 rpm
Air Volume: 26,839 CFM
Air Pressure: 60 Pa
Noise: less than 65 dB
Show More Technical Specifications
Voucher
Do you have a question about this product?
Receive $5 off your purchase simply for asking a question! Ask us anything! In fact, we use questions asked on our website about our products to further inform future customers, so we want you to leave a question. In addition, you will automatically be entered in our monthly $100 giveaway when you ask a question! Click for details »
If you need an answer to your question immediately, please call our friendly CUSTOMER SUPPORT.

Review your question to make any final changes.
It may be sent to fellow customers so ask as if you were asking a friend.

Cuitlahuac C.
Nov 12, 2019

Why that fan motor is 380 volts?

380V/50HZ is the normal voltage for this industrial exhaust fan. However, our factory can supply custom motors, such as 220V, 380V, 415V, and 60HZ.

Reply Deelat Industrial on Nov 14, 2019
$49130
Industrial Exhaust Fan_D1143832_1
SKU #D1143832
Industrial Exhaust Fan - Push-Pull Centrifugal - 40"

Industrial Exhaust Fan - Push-Pull Centrifugal - 40" The push-pull centrifugal industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$37390
Industrial Exhaust Fan_D1143844_1
SKU #D1143844
Industrial Exhaust Fan - Standard - 35"

Industrial Exhaust Fan - Standard - 35" The standard industrial exhaust fan has a 35 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor...

$6150
Angle Milling Cutter_D1142165_1
SKU #D1142165
Angle Milling Cutter - Single Angle - 3.1" Diameter - 75 Degrees

Angle Milling Cutter - Single Angle - 3.1" Diameter - 75 Degrees The angle milling cutter is made from high quality HSS material and is a single angle cutter. It has a diameter of 3.1" and an angle of 75 degrees. Function The milling cutter...

$30050
Industrial Exhaust Fan_D1143849_1
SKU #D1143849
Industrial Exhaust Fan - Wall Mount - 28" - Belt Drive

Industrial Exhaust Fan - Wall Mount - 28" - Belt Drive The wall mount industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...

$37840
Industrial Exhaust Fan_D1143830_1
SKU #D1143830
Industrial Exhaust Fan - Push-Pull Centrifugal - 28"

Industrial Exhaust Fan - Push-Pull Centrifugal - 28" The push-pull centrifugal industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$45290
Industrial Exhaust Fan_D1143839_1
SKU #D1143839
Industrial Exhaust Fan - Heavy Hammer - 43"

Industrial Exhaust Fan - Heavy Hammer - 43" The heavy hammer industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...

$37730
Industrial Exhaust Fan_D1143852_1
SKU #D1143852
Industrial Exhaust Fan - Wall Mount - 43" - Belt Drive

Industrial Exhaust Fan - Wall Mount - 43" - Belt Drive The wall mount industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...

$46760
Industrial Exhaust Fan_D1143831_1
SKU #D1143831
Industrial Exhaust Fan - Push-Pull Centrifugal - 35"

Industrial Exhaust Fan - Push-Pull Centrifugal - 35" The push-pull centrifugal industrial exhaust fan has a 35 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$47550
Industrial Exhaust Fan_D1143833_1
SKU #D1143833
Industrial Exhaust Fan - Push-Pull Centrifugal - 43"

Industrial Exhaust Fan - Push-Pull Centrifugal - 43" The push-pull centrifugal industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$39650
Industrial Exhaust Fan_D1143845_1
SKU #D1143845
Industrial Exhaust Fan - Standard - 40"

Industrial Exhaust Fan - Standard - 40" The standard industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt three...

$15250
Negative Pressure Duct_D1143708_1
SKU #D1143708
Negative Pressure Duct - 20" (Diameter) * 16 ft (Length)

Negative Pressure Duct - 20" (Diameter) * 16 ft (Length) The 20” in diameter negative pressure proof duct has a length of 16 feet and is made out of a PVC material. It can endure negative pressure of 8000pa. Function The duct connects...

$53650
Industrial Exhaust Fan_D1143840_1
SKU #D1143840
Industrial Exhaust Fan - Heavy Hammer - 50"

Industrial Exhaust Fan - Heavy Hammer - 50" The heavy hammer industrial exhaust fan has a 50 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...