Heavy Duty Bench Vise with Anvil and Swivel Base
- 6" - All Steel
Product Video
General Description
Heavy Duty Bench Vise with Anvil and Swivel Base - 6" - All Steel
The bench vise has a 6" jaw opening and a 3" throat depth. The vise is constructed out of SC37 stainless steel and features a 360° swivel base and an anvil.
Function
The machinist vise is mounted to a work bench using screws. One jaw remains in place as the other is opened using the screw mechanism. The jaws clamp down on an object, which is securely held in place throughout the course of the job.
Applications
The machinist vise is ideal as a tool in the workshop for hobbyists and professional craftsmen who need secure holds while sawing, planning, and drilling.
Technical Details
| Materials: | SC37 cast carbon steel |
|---|---|
| Jaw Opening: | 6" |
| Throat depth: | 3" |
| *360 Swivel base | |
| *Equipped with anvil and pipe jaw. | |
| *Hardness of vise jaw HRC C25 ~ HRC30 | |
| *Finished with wrinkle paint. | |
| Brand: | Deelat Industrial |
Do you have a question about this product?
Industrial Floor Scale - 6614lbs - 59" W x 47 1/4" L - Digital - Low Profile The industrial floor scale has a digital display, is low profile, and has a steel construction. The size of the scale is 59" wide by 47 1/4" meters long, and the weight...
Motor Start Capacitor – 378 – 455 Microfarads - 8.5 x 3.6 x 8.5 cm The motor start capacitor has a microfarad rating of 378 – 455 and dimensions of 8.5 x 3.6 x 8.5 cm. The operational temperature range is -25 – 65° Celsius, and the tolerance...
Toggle Clamp - Push/Pull - Holding Capacity 110lbs This toggle clamp includes a control handle, holding bar and a system of pivot pins and levers. This particular model is a push/pull type clamp with a handle opening angle of 190 degrees and a...
Duct Clamp – Steel - Size 10” - 10 Pieces The duct clamp is made out of steel and the size is 10”. A package contains 10 pieces of clamps. Function The screw clamp employs a stainless steel band which wraps around ducting as it makes a...
Our selection of staples offer top quality, consistent performance with minimal jamming during use. They are ideal for a range of standard stationary applications and will securely pin together a number of documents. They have been constructed for...
End Mill - 4 Flute - Regular Length - Dia. 18mm The end mill features a high-speed steel and cobalt construction with a 4-flute design. It is a regular length type with a diameter of 18mm. Function All of Deelat's various end mill sizes...
Both flame proof and energy efficient, these LED lamps are safe to use in a factory or other potentially hazardous environment. They require no maintenance, are corrosion resistant and extremely reliable. Easily mounted, with each lamp you will...
Motorized Ball Valve Actuator with Manual Handle – DC – >5N.m, 24 V - On/Off The motorized ball valve actuator is DC with a power supply rating of 24 V. The control is on/off, and the output torque is >5N.m. The unit also has a manual handle....
Valve Body – 3-Way – 1/2” DN (DN 15) The valve body is 3-way with a brass construction and a 1/2" nominal diameter (DN 15). The material of the inner ball is stainless steel, and the admissible pressure is 2.0 MPa. Function The valve body is...
Motor Start Capacitor – 270 – 324 Microfarads - 7 x 3.6 x 7 The motor start capacitor has a microfarad rating of 270 – 324 and dimensions of 7 x 3.6 x 7. The operational temperature range is -25 – 65° Celsius, and the tolerance range is +/- 20%....
Commercial Security Camera - 2MP Bullet - 36 IR LED - 3.6mm Lens The commercial security camera has a resolution of 2MP and an integrated IR cut function. It is a bullet camera with specs of 1/4" AR CMOS. The lens size is 3.6mm, providing a...
Heavy Duty Bench Vise with Anvil and Swivel Base - 6" - All Steel The bench vise has a 6" jaw opening and a 3" throat depth. The vise is constructed out of SC37 stainless steel and features a 360° swivel base and an anvil. Function The...
is this 6" vice actually made in Australia?
Hello Greg, thank you for your question. No this steel vise is not manufactured in Australia but rather manufactured in China. We are also able to source American made vises as well.