orders over $400
Fastening Tool for Nylon Cable Tie and Wire
- 2.4-4.8mm, Yellow
Product Video
General Description
Technical Details
| Size: | 16.5x6x1 cm |
|---|---|
| Application: | For Nylon cable ties 2.4-4.8mm |
| Length: | 165mm |
| Weight: | 0.3kg |
| Brand: | Deelat Industrial |
| Warranty: | 180 Day |
Do you have a question about this product?
PVC Flexible Duct – 10" (Diameter) * 15ft (Length) The 10” in diameter PVC duct has a length of 15 feet and is made out of a PVC material. It is able to endure temperatures between -4°F and +176°F. It is built with a steel wire helix frame....
Carbide Burr - Type S - 20mm x 12mm The carbide burr is made from precise construction and has a cutting length of 20mm and diameter of 12mm. It is type S. Function The carbide burr works as a file to remove excess material and sharp edges....
Motorized Ball Valve Actuator with Manual Handle – AC – 10N.m, 110 V - On/Off The motorized ball valve actuator is AC with a power supply rating of 110 V. The control is on/off, and the output torque is 10N.m. The unit also has a manual handle....
Short Radius Elbow – 3A – 1-1/4” The short elbow pipe is a 3A standard 1-1/4” pipe with an angle of 45°. It is constructed out of stainless steel and features a welded connection. The wall thickness is .065”. Function The short elbow pipe is...
For cable bundling, this tool will both fasten and cut ties and wires. With adjustable tensioning, it works with nylon cables with a width of 2.4-4.8mm and the tool itself features a length of 165mm.
Film Thickness Gauge – Range 0-1.8mm – 2.4" x 1.2" x 4.3" The film thickness gauge has a measuring range of 0-1.8 mm (0-70.9 mil) and a resolution of 0.01 mm. The size of the thickness tester is 2.4" x 1.2" x 4.3". Function The film thickness...
This features a super fast Intel Atom processor and high amounts of memory. With stunning resolution and easy-to-use design, you're going to see that this POS system is all that you need for your commercial or retail establishment. With a sturdy...
Motor Start Capacitor – 233 – 280 Microfarads - 8.5 x 3.6 x 8.5 The motor start capacitor has a microfarad rating of 233 – 280 and dimensions of 8.5 x 3.6 x 8.5. The operational temperature range is -25 – 65° Celsius, and the tolerance range is...
Battery - Replacement for Solar Powered Street Light D1151530 The battery replacement unit is made specifically for the 6000 Lumens solar powered street and parking lot light D1151530. Function The battery is to be installed into the Solar...
Kerosene or Diesel Forced Air Heater - 10 Gal - 220V The kerosene or diesel forced air heater is fueled by kerosene or diesel and has a heating area of 3,175 square feet. The heat output is 125,000 BTU and the voltage is 220V. Function The...
Motorized Ball Valve Actuator with Manual Handle – AC – 10N.m, 220 V - 3-Point The motorized ball valve actuator is AC with a power supply rating of 220 V. The control is 3-point, and the output torque is 10N.m. The unit also has a manual...
Concentric Reducer – 3A – 3” – 2” The concentric reducer pipe is a 3A standard 3” – 2” pipe. It is constructed out of stainless steel and features a weld connection. The wall thickness is .065”. Function The concentric reducer pipe is used as...