Air Rivet-Nut Pull Setter
- M4, M5, M6 Screw On, 1300 RPM
Product Video
General Description
Air Rivet Nut Pull Setter – M4, M5, M6 Screw On, 1300 RPM
The air rivet nut pull setter has a head size of M4, M5, and M6 and a freeload speed of 1300 RPMs. The overall weight of the tool is 1.05 kg.
Function
The air rivet nut pull setter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole.
Applications
The air rivet nut pull setter works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.
Technical Details
| Size: | M4, M5, M6 |
|---|---|
| Head Installation: | Screw On |
| RPM: | 1300 |
| Air Pressure: | 90 PSI |
| Air Consumption: | 5 CFM |
| Air Inlet Size: | 1/4" |
| Weight: | 1.05kg |
| Brand: | Deelat Industrial |
Do you have a question about this product?
Our selection of staples offer top quality, consistent performance with minimal jamming during use. They are ideal for a range of standard stationary applications and will securely pin together a number of documents. They have been constructed for...
Get the most out of your HVAC system and ensure high quality, safe and breathable air with use of this highly effective synthetic fiber filter. It can be used in a range of settings and environments including industrial buildings, warehouses,...
Pneumatic Air Cutter (1.0 mm, 1.6 mm) The pneumatic shear has a cutting capacity on iron wire of 1.0 mm and on copper wire of 1.6 mm. The air inlet is P.T 1/4" and the unit has an air consumption of 230 cubic cm/min. Function The pneumatic...
Valve Body – 3-Way – 1/2” DN (DN 15) The valve body is 3-way with a brass construction and a 1/2" nominal diameter (DN 15). The material of the inner ball is stainless steel, and the admissible pressure is 2.0 MPa. Function The valve body is...
Electronic Ballast - T5 - F54T5HO This electronic ballast is size T5 and type F54T5HO. Function The electronic ballast operates quietly without humming and runs cool. It can be used with various types of bulbs. An electric ballast controls...
Air Rivet Nut Pull Setter – M4, M5, M6 Screw On, 1300 RPM The air rivet nut pull setter has a head size of M4, M5, and M6 and a freeload speed of 1300 RPMs. The overall weight of the tool is 1.05 kg. Function The air rivet nut pull setter is...
This black ergonomic stool is built tough and built to last. Stays comfortable even during extended sitting periods. With 5 ergonomic adjustments and contoured seat and back, the stool's design helps to fight fatigue. Upholstered with puncture...
Air Pull Rivet-Nut Head – M8 – Screw On The air pull rivet nut head has a size of M8 and is intended as a screw on head, used with an air rivet nut pull setter. Specifically, it is compatible with D1171691, D1151470, D1151472, D1151471, D1774136...
Heavy Duty Bench Vise with Anvil and Swivel Base – 3-1/2" – Standard Duty The bench vise comes with an anvil and swivel base, and it has a width of 3-1/2". The vise is standard duty. Function The machinist vise is mounted to a work bench...
Ultrasonic Thickness Gauge – Max Range 12" The ultrasonic thickness gauge has a max range of 12". The size of the unit is 5 3/4" x 1 1/8" x 2 27/32", and the resolution is 0.01 mm. Function The thickness meter works by emitting a sound pulse...
Cross Stirrer – PTFE Coated The cross stirrer has PTFE coated shaft and with a shaft length of 13.75" and a shaft diameter of .25". The impeller diameter is 2.5". Function The cross stirrer is used in conjunction with the D1162471 overhead...