Industrial Exhaust Fan - Heavy Hammer - 55"

SKU #D1143841

Certification

Placeholder
SGS certified
Buy this product
 

Price
$73099
Quantity
 

Payment Methods

Payment Methods

Volume discounts available

Quantity 5 units 7 units 10 units 25 units 50 units
Discount 2% off 3% off 5% off 8% off 10% off
$1 donation

General Description

Industrial Exhaust Fan - Heavy Hammer - 55"


The heavy hammer industrial exhaust fan has a 55 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor that has a maximum speed of 440 revolutions per minute.

Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. A heavy hammer fan has two hammers at the bottom of the fan to open and close the blinds. The fan's hammers open the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and close the shutter when the fan is off.

Applications
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.

Technical Details

Certifications: SAA, SGS, CE, BV
Type: Heavy Hammer
Size: 60.4*60.4*15.7"
Diameter: 55.1"
Fan Speed: 440 rpm
Air Volume: 35,315 CFM
Air Pressure: 60 Pa
Noise: less than 65 dB
Show More Technical Specifications
Voucher
Do you have a question about this product?
Receive $5 off your purchase simply for asking a question! Ask us anything! In fact, we use questions asked on our website about our products to further inform future customers, so we want you to leave a question. In addition, you will automatically be entered in our monthly $100 giveaway when you ask a question! Click for details »
If you need an answer to your question immediately, please call our friendly CUSTOMER SUPPORT.

Review your question to make any final changes.
It may be sent to fellow customers so ask as if you were asking a friend.

Trent W.
Mar 20, 2019

Are your fans limited to 380V?

Hi Trent, thanks for your question. The fans aren't limited to 380V. They can run on 110V, 220V, 380V, 400V, 415V and 450V. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
Barry H.
Mar 18, 2019

Are these unit water proof ? I want to set it up on the outside of the building wall to remove exhaust gases and dust parasitical from the air is this a 3 phase motor.

Hi Barry, thanks for your question. The fan is made of galvanized steel, which is corrosion resistance. The fan is generally installed in the wall or outside of the wall. We also have stainless steel fans if you need a large quantity. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
Peter P.
Mar 18, 2019

Can you tell me the IP rating of the motor. Also they are 380 volt 3 phase I believe also can you price me freight to Stroud NSW post code 2425?

Thank you for your question, Peter. For the 50 Hz motor, it's 1400 rpm. For the 60 Hz motor, it's 1700 rpm. The shipping cost is US$233.99 by FedEx Ground. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
Trent W.
Mar 20, 2019

Do these fans have CSA approval?

Hi Trent, thanks for your interest in our fans. Unfortunately, the fans do not have CSA approval. However, they do have CE and ISO certifications. If you have any other questions or concerns please do not hesitate to contact us.

Reply Deelat Industrial on Mar 26, 2019
Ray B.
Jan 17, 2020

Which fan is better, the Heavy Hammer or the Push Pull type?

The push pull type of this industrial exhaust fan has higher power, but it is more expensive.

Reply Deelat Industrial on Jan 21, 2020
Ray B.
Jan 17, 2020

Do you have exhaust shutters for these fans? They mount at the other end of the greenhouse to let the air in.

Yes, we can do exhaust shutters on these industrial exhaust fans. Please contact our customer support at 1-888-667-5776 for more information.

Reply Deelat Industrial on Jan 21, 2020
$44799
Industrial Exhaust Fan_D1143851_1
SKU #D1143851
Industrial Exhaust Fan - Wall Mount - 40" - Belt Drive

Industrial Exhaust Fan - Wall Mount - 40" The wall mount industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt...

$55299
Heat and High Temperature Resistant Duct - 18" (Diameter) x 15 ft (Length) - 660°F_D1171928_1
SKU #D1171928
Heat and High Temperature Resistant Duct - 18" (Diameter) x 15 ft (Length) - 660°F

Heat and High Temperature Resistant Duct - 18" (Diameter) x 15 ft (Length) - 660°F The heat and high temperature resistant duct is 18” in diameter and has a length of 15 feet. It can endure a temperature range of -22°F up to 660°F. Function...

$61699
Industrial Exhaust Fan_D1143832_1
SKU #D1143832
Industrial Exhaust Fan - Push-Pull Centrifugal - 40"

Industrial Exhaust Fan - Push-Pull Centrifugal - 40" The push-pull centrifugal industrial exhaust fan has a 40 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$44199
Flexible Duct_D1146683_1
SKU #D1146683
PVC Flexible Duct - 24" (Diameter) * 25ft (Length)

PVC Flexible Duct – 24" (Diameter) * 25ft (Length) The 24” in diameter PVC duct has a length of 25 feet and is made out of a PVC material. It is able to endure temperatures between -4°F and +176°F. It is built with a steel wire helix frame....

$52699
Industrial Exhaust Fan_D1143846_1
SKU #D1143846
Industrial Exhaust Fan - Standard - 43"

Industrial Exhaust Fan - Standard - 43" The standard industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 380 volt motor...

$47499
Industrial Exhaust Fan_D1143830_1
SKU #D1143830
Industrial Exhaust Fan - Push-Pull Centrifugal - 28"

Industrial Exhaust Fan - Push-Pull Centrifugal - 28" The push-pull centrifugal industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$59699
Industrial Exhaust Fan_D1143833_1
SKU #D1143833
Industrial Exhaust Fan - Push-Pull Centrifugal - 43"

Industrial Exhaust Fan - Push-Pull Centrifugal - 43" The push-pull centrifugal industrial exhaust fan has a 43 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$37699
Industrial Exhaust Fan_D1143849_1
SKU #D1143849
Industrial Exhaust Fan - Wall Mount - 28" - Belt Drive

Industrial Exhaust Fan - Wall Mount - 28" - Belt Drive The wall mount industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by...

$67299
Industrial Exhaust Fan_D1143840_1
SKU #D1143840
Industrial Exhaust Fan - Heavy Hammer - 50"

Industrial Exhaust Fan - Heavy Hammer - 50" The heavy hammer industrial exhaust fan has a 50 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...

$88899
Industrial Exhaust Fan_D1143835_1
SKU #D1143835
Industrial Exhaust Fan - Push-Pull Centrifugal - 55"

Industrial Exhaust Fan - Push-Pull Centrifugal - 55" The push-pull centrifugal industrial exhaust fan has a 55 inch fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are...

$73099
Industrial Exhaust Fan_D1143841_1
SKU #D1143841
Industrial Exhaust Fan - Heavy Hammer - 55"

Industrial Exhaust Fan - Heavy Hammer - 55" The heavy hammer industrial exhaust fan has a 55 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...

$37999
Industrial Exhaust Fan_D1143836_1
SKU #D1143836
Industrial Exhaust Fan - Heavy Hammer - 28"

Industrial Exhaust Fan - Heavy Hammer - 28" The heavy hammer industrial exhaust fan has a 28 inch fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...