Pneumatics and Vehicle Maintenance
Featured Products

Pneumatic/Hydraulic Riveter Gun - 1/4"– 3 Jaws The pneumatic nut riveter gun has a rivet capacity of 3/32” to ¼” (2.4 to 6.4 mm) and the air consumption is 4.2 CFM. The tool has 3 jaws, and its total weight is 2 kg. Function The pneumatic nut riveter gun uses a hydraulic system and is powered via air pressure fed into the bottom of the tool. A rivet is inserted into the head of the riveter, and the tool is then aimed at a predrilled hole. Once the head is aligned with the hole, the riveter is triggered and immediately locks the mandrel to the body, cuts the mandrel, and deploys the rivet, creating a secure bond. Applications The pneumatic nut riveter gun is ideal for any context in which rivets are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and woodworking. The pneumatic function makes the tool especially useful for cases where installing many rivets is required.

Pneumatic Riveter – 1/4", 700 RPM - Quick Change The rivet tool has a head size of 1/4" and a freeload speed of 700 RPMs. The overall length of the tool is 200 mm, and the tool utilizes a quick change head design for swapping mandrel sizes. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.

Pneumatic Riveter – 3/8", 450 RPM The rivet tool has a head size of 3/8” and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.

Pneumatic Air Cutter (1.0 mm, 1.6 mm) The pneumatic shear has a cutting capacity on iron wire of 1.0 mm and on copper wire of 1.6 mm. The air inlet is P.T 1/4" and the unit has an air consumption of 230 cubic cm/min. Function The pneumatic air cutter is fed air from the bottom of the unit, which powers the cutting head. When a material that needs cutting is positioned within the head, manually squeezing the handle on the nipper activates the shearing action of the blade. The nipper can also be used for crimping, bending, and grabbing according to specific needs. Applications The pneumatic shear is ideal for environments where copper, iron, and other hard materials need to be cut quickly and in large quantities, such as in construction, automotive, industrial settings.

Pneumatic Riveter – 1/4", 1000 RPM - Quick Change The rivet tool has a head size of 1/4" and a freeload speed of 1000 RPMs. The overall length of the tool is 205 mm, and the tool utilizes a quick change head design for swapping mandrel sizes. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.

Pneumatic Riveter – 5/16", 450 RPM The rivet tool has a head size of 5/16" and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm, and it utilizes a side air exhaust. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A rivet nut is threaded onto the head and inserted into a determined hole. The tool is then activated, collapsing the rivet nut and securing it tightly to the material around it. The setter then spins out of the threaded hole. Applications The rivet tool works well for any context in which rivet nuts are needed, such as construction, metal fabrication, the automotive and aeronautics industries, and electronics. The pneumatic function makes the tool especially useful for cases where setting many rivet nuts is required.
Vehicle Lighting Show all 77 products

Manufactured to original equipment standards, this 12v LED bulb provides a bright and reliable light source for use in cars, motorcycles and vans. The bulb is white with a color temperature of 4500-6000K and is quick and easy to install. Providing...

Replace your vehicle brake light effectively and affordably with this single PR21W-382R lightbulb. It provides a reliable warning light that indicates to other road users that you are braking and slowing down or coming to a stop. This brake light...

Replace your vehicle headlight effectively and affordably with this single H1-448 vehicle headlight. It provides excellent illumination of the road in front, making it clear to see whats happening ahead of you in all weather conditions. This bulb...

Replace your vehicle headlight effectively and affordably with this single H4-472 lightbulb. It provides standard illumination of the road in front, making it clear to see whats happening ahead of you in all weather conditions. This bulb features...

Replace your festoon bulb effectively and affordably with this single 239 lightbulb. Festoon bulbs are typically installed into vehicles for use as side lighting, internal lighting and number plate lighting. This bulb features an SV8 socket, has...

Replace your festoon bulb effectively and affordably with this single 264 lightbulb. Festoon bulbs are typically installed into vehicles for use as side lighting, internal lighting and number plate lighting. This bulb features an SV8 socket, has...
Stepper Motors Show all 40 products

Stepper Motor - 0.19NM - 34mm Length - 5mm Shaft The stepper motor is 0.3KG with a holding torque of 0.19N.m, and the overall length of the unit is 34mm. The shaft is 5mm long. The stepper motor also has a splashproof construction. Function...

Stepper Motor - 0.19NM - 34mm Length - 8mm Shaft The stepper motor is 0.5KG with a holding torque of 0.19N.m, and the overall length of the unit is 34mm. The stepper motor also has a splashproof construction. Function The step motor has an...

Stepper Motor – 2-Phase - 0.8N.m, 56mm Length The stepper motor is 2-phase with a holding torque of 0.8N.m, and the overall length of the unit is 56mm. The stepper motor also has a splashproof construction. Function The step motor has an...

Stepper Motor – 2-Phase - 1.2N.m, 76mm Length The stepper motor is 2-phase with a holding torque of 1.2N.m, and the overall length of the unit is 76mm. The stepper motor also has a splashproof construction. Function The step motor has an...

Stepper Motor – 2-Phase - 12N.m, 134mm Length The stepper motor is 2-phase with a holding torque of 12N.m, and the overall length of the unit is 176mm. The stepper motor also has a splashproof construction. Function The step motor has an...

Stepper Motor – 2-Phase - 18N.m, 159mm Length The stepper motor is 2-phase with a holding torque of 0.18N.m, and the overall length of the unit is 159mm. The stepper motor also has a splashproof construction. Function The step motor has an...
Tire Chains Show all 29 products

Tire Chain - KN100 - 5 Pairs This tire chain is type KN100, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...

Tire Chain - KN110 - 5 Pairs This tire chain is type KN110, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...

Tire Chain - KN120 - 5 Pairs This tire chain is type KN120, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...

Tire Chain - KN130 - 5 Pairs This tire chain is type KN130, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...

Tire Chain - KN20 - 5 Pairs This tire chain is type KN20, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...

Tire Chain - KN30 - 5 Pairs This tire chain is type KN30, and is a skid loader tire chain with H/D twist cross chains and 2 link spacing. It is made with rugged steel. 5 pairs of chains are included. Function The cable chains attach around...
Pneumatic Air Cutters Show all 6 products

Pneumatic Air Cutter (0.5 mm, 1 mm) The pneumatic shear has a cutting capacity on iron wire of 0.5 mm and on copper wire of 1 mm. It has an air inlet of P.T 1/4" and has an air consumption of 28 L/min. Function The pneumatic air cutter is fed...

Pneumatic Air Cutter (0.9 mm) The pneumatic shear has a cutting capacity on stainless steel of 0.9 mm. The color of the unit is orange, and it has an air consumption of 3 CFM. Function The pneumatic air cutter is fed air from the bottom of...

Pneumatic Air Cutter (1.0 mm, 1.6 mm) The pneumatic shear has a cutting capacity on iron wire of 1.0 mm and on copper wire of 1.6 mm. The air inlet is P.T 1/4" and the unit has an air consumption of 230 cubic cm/min. Function The pneumatic...

Pneumatic Air Cutter (2.8 mm, 3.3 mm) The pneumatic shear has a cutting capacity on iron wire of 2.8 mm and on copper wire of 3.3 mm. It has an air consumption of 230 cubic cm/min. Function The pneumatic air cutter is fed air from the bottom...

Pneumatic Air Cutter for Plastics (5.0 mm, 7.0 mm) The pneumatic shear has a cutting capacity on hard plastic of 5.0 mm and on soft plastic of 7.0 mm. It uses an FD-6 blade and has an air consumption of 112 l/min (4 CFM). Function The...

Replacement Blade for Pneumatic Air Cutter (0.5 mm, 1 mm, D1151446) The replacement blade for the pneumatic shear has a cutting capacity on iron wire of 0.5 mm and on copper wire of 1 mm and is intended for use with product D1151446. Function...
Replacement Parts Show all 11 products

Ball Bearing for 1000 RPM – Quick Change - Rivet Nut Setter Replacement Ball Bearing for the 1000 RPM Quick Change Series Rivet Nut Setter. Specifically, it is compatible with D1774131, D1774132, D1774134, and D1774135. Function The head...
Air Hammer Show all 24 products

Air Hammer - 98mm Stroke x 225mm Length - 2200 BPM This air hammer has a piston stroke of 98mm and an overall length of 225mm. It has 2200 BPM. Function The air hammer is powered via air pressure fed into the bottom of the unit. When the...

Air Hammer - Kit - 50 Piece - 150mm Length This air hammer has an overall length of 150mm. The kit features a total of 50 different tool pieces, which are listed below. Function The air hammer is powered via air pressure fed into the bottom...

Air Hammer - Kit - 7 Piece - 66mm Stroke x 181mm Length - 3200 BPM This air hammer has a piston stroke of 66mm and an overall length of 181mm. It has 3200 BPM. The kit features a total of 7 different tool pieces, including a blow case, a 190mm...

Air Hammer - Kit - 7 Piece - 98mm Stroke x 181mm Length - 2200 BPM This air hammer has a piston stroke of 98mm and an overall length of 181mm. It has 2200 BPM. The kit features a total of 7 different tool pieces, including a blow case, a 250mm...

Air Hammer - Kit - 71 Piece - 150mm Length This air hammer has an overall length of 150mm. The kit features a total of 71 different tool pieces, which are listed below. Function The air hammer is powered via air pressure fed into the bottom...

Air Hammer - Kit - 9 Piece - Round/Hex - 150mm Length This air hammer has an overall length of 150mm. The kit features a total of 9 different tool pieces, including the hammer, 4 125mm round/hex shank chisels, a spring retainer, a 1/4" NPT male...
Pneumatic Riveters Show all 25 products

Pneumatic Riveter – M10, 450 RPM The rivet tool has a head size of M10 and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...

Pneumatic Riveter – 3/16", 700 RPM - Quick Change The rivet tool has a head size of 3/16" and a freeload speed of 700 RPMs. The overall length of the tool is 200 mm, and the tool utilizes a quick change head design for swapping mandrel sizes....

Pneumatic Riveter – 3/8", 450 RPM The rivet tool has a head size of 3/8” and a freeload speed of 450 RPMs. The overall length of the tool is 210 mm. Function The pneumatic riveter is powered via air pressure fed into the bottom of the tool. A...

Pneumatic Riveter - 3mm - Handheld The rivet tool has a 3 millimeter nozzle size, a 90-degree-angle headpiece and a freeload speed of 1600 RPMs. The overall length of the tool is 270 mm, and it utilizes a rear air exhaust. Function The...

Pneumatic Riveter - 4mm - Handheld The rivet tool has a 4 millimeter nozzle size, a 90-degree-angle headpiece and a freeload speed of 1600 RPMs. The overall length of the tool is 270 mm, and it utilizes a rear air exhaust. Function The...

Pneumatic Riveter - 5mm - Handheld The rivet tool has a 5 millimeter nozzle size, a 90-degree-angle headpiece and a freeload speed of 1600 RPMs. The overall length of the tool is 270 mm, and it utilizes a rear air exhaust. Function The...
Pneumatic Wrenches Show all 33 products

Pneumatic Wrench - 10mm - 180 RPM, 10 N.m The air wrench has a hex size of 10 mm. The tool has a maximum torque of 10 N.m and a freeload speed of 180 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....

Pneumatic Wrench - M6 - 250 RPM, 34 N.m The air wrench has a bolt size capacity of M6. The tool has a maximum torque of 34 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the...

Pneumatic Wrench - 1/2" - 180 RPM, 95 N.m The air wrench has a hex size of 1/2". The tool has a maximum torque of 95 N.m and a freeload speed of 180 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....

Pneumatic Wrench - 1/2" - 250 RPM, 25 N.m The air wrench has a hex size of 1/2 inch. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the...

Pneumatic Wrench - 1/4" - 180 RPM, 10 N.m The air wrench has a hex size of 1/4 inch. The tool has a maximum torque of 10 N.m and a freeload speed of 180 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the...

Pneumatic Wrench - 10mm - 250 RPM, 25 N.m The air wrench has a hex size of 10 mm. The tool has a maximum torque of 25 N.m and a freeload speed of 250 RPMs. Function The air wrench is powered via air pressure fed into the bottom of the unit....
Pneumatic / Hydraulic Nut Riveter Guns Show all 10 products

Pneumatic/Hydraulic Riveter Gun - 1/4"– 3 Jaws The pneumatic nut riveter gun has a rivet capacity of 3/32” to ¼” (2.4 to 6.4 mm) and the air consumption is 4.2 CFM. The tool has 3 jaws, and its total weight is 2 kg. Function The pneumatic nut...

Pneumatic/Hydraulic Riveter Gun – 1/4", 1200 RPM The pneumatic/hydraulic riveter gun has rivet settings of 1/4" and the free load speed is 1200 RPMs. The overall length of the tool is 278 mm. Function The pneumatic/hydraulic riveter gun uses...

Pneumatic/Hydraulic Riveter Gun - 2.4 mm, 3.2 mm, 4 mm, 4.8 mm - 3 Jaw - Blue The pneumatic nut riveter gun has nose pieces supporting rivet capacities of 2.4, 3.2, 4, and 4.8 mm. The air consumption is 1.4 L/min, and the tool has 3 jaws. The...

Pneumatic/Hydraulic Riveter Gun - 2.4 mm, 3.2 mm, 4 mm, 5 mm - 2 Jaw - Black The pneumatic nut riveter gun has nose pieces supporting rivet capacities of 2.4 mm, 3.2 mm, 4 mm, and 5 mm. The air consumption is 4 CFM, and the tool has 2 jaws. The...

Pneumatic/Hydraulic Nut Riveter Gun - 3 to 12 mm Hydraulic The pneumatic nut riveter gun supports rivet capacities of 3 - 12 mm. The tool has a working stroke of 6 mm. Function The pneumatic nut riveter gun uses a hydraulic system and is...

Pneumatic/Hydraulic Riveter Gun - 3.2 mm to 6.4 mm - 3 Jaw Hydraulic The pneumatic nut riveter gun supports rivet capacities of 3.2 - 6.4 mm. The tool has a working stroke of 17 mm, and the tool has 3 jaws. Function The pneumatic nut riveter...
Pneumatic Shears Show all 4 products

Pneumatic Shear - Cutting Capacity 1.2-1.6mm Deelat’s pneumatic shears feature an air inlet of 6.4mm and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 1.2-1.6mm. Function The pneumatic shears are...

Pneumatic Shear – Cutting Capacity 1.9mm Deelat’s pneumatic shears feature an air inlet of 6.4mm and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 1.9mm. Function The pneumatic shears are powered...

Pneumatic Shear – Cutting Capacity 2.3mm Deelat’s pneumatic shears feature an air inlet of 6.4mm and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 2.3mm. Function The pneumatic shears are powered...

Pneumatic Shear – Cutting Capacity 5.5mm Deelat’s pneumatic shears feature an air inlet of 6.4mm and a maximum air pressure of 90psi. The shear blades on this particular shear have a width of 5.5mm. Function The pneumatic shears are powered...