Threaded Flange - Nominal Pipe Size 1-1/4" - Class 300 - RaisedFace - Stainless Steel - F304/304L
Threaded Flange – Nominal Pipe Size 1-1/4” – Class 300 - Raised Face – Stainless Steel – F304/304L
The screw-on flange's nominal pipe size is 1-1/4” with a total diameter of 5.25”. It has a pressure class rating of 300 and has 4 bolt holes. It is made of AMSE B 16.5 (steel) and comes in a thickness of 1.0625”.
The threaded flange is very similar in function to the slip-on flange however it allows for a pipe to be screwed in without the need for welding and therefore has a bore that is larger than the outer diameter of the pipe. The threaded flange is used in low pressure systems that are run in normal temperatures.
The screw-on flange is used in pipeline applications where liquid or gas is transported from one location to another. The pipe used must be of a certain thickness to be used with this flange. Best used in applications where welding is dangerous.
|Nominal Pipe Size:||1-1/4"|
|Number of Bolt:||4|
|Overall Diameter:||5.25 inch|
|Overall Thickness:||1.0625 inch|