Industrial Exhaust Fan - Heavy Hammer - 710 mm
Certification
Volume discounts available
| Quantity | 5 units | 7 units | 10 units | 25 units | 50 units |
| Discount | 2% off | 3% off | 5% off | 8% off | 10% off |
General Description
Industrial Exhaust Fan - Heavy Hammer - 710 mm
The heavy hammer industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 415 volt motor that has a maximum speed of 560 revolutions per minute.
Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. A heavy hammer fan has two hammers at the bottom of the fan to open and close the blinds. The fan's hammers open the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and close the shutter when the fan is off.
Applications
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.
Technical Details
| Certifications: | CE |
|---|---|
| Type: | Heavy Hammer |
| Size: | 810*810*400mm |
| Diameter: | 710 mm |
| Fan Speed: | 560 rpm |
| Air Volume: | 295 m3/min |
| Air Pressure: | 55 Pa |
| Noise: | less than 65 dB |
Do you have a question about this product?
Industrial Exhaust Fan - Heavy Hammer - 1100 mm The heavy hammer industrial exhaust fan has a 1100 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...
Portable Ventilation Fan - Diameter 400 mm - Single Phase - 220V The single phase vent fan has a diameter of 400 mm and the voltage is 220V. It has an air volume of 96 cubic meters/min, and its max RPM rating is 2800 RPMs. Function The...
Industrial Exhaust Fan - Wall Mount - 1000 mm - Belt Drive The wall mount industrial exhaust fan has a 1000 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is...
Industrial Exhaust Fan - Wall Mount - 710 mm - Belt Drive The wall mount industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered...
Industrial Exhaust Fan - Push-Pull Centrifugal - 1100 mm The push-pull centrifugal industrial exhaust fan has a 1100 mm fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter...
Industrial Exhaust Fan - Wall Mount - 900 mm - Belt Drive The wall mount industrial exhaust fan has a 900 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered...
Industrial Exhaust Fan - Push-Pull Centrifugal - 710 mm The push-pull centrifugal industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter...
Solar Street Light - 10,000 Lumens LED - with Remote The solar street light is 10,000 lumens and has dimensions of 193.3cm x 42.1cm x 22.5 cm. The unit has aluminium alloy and tempered glass construction and integrated LEDs. It has a light...
Industrial Exhaust Fan - Wall Mount - 1400 mm - Belt Drive The wall mount industrial exhaust fan has a 1400 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is...
Industrial Exhaust Fan - Push-Pull Centrifugal - 1000 mm The push-pull centrifugal industrial exhaust fan has a 1000 mm fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter...
Industrial Exhaust Fan - Standard - 710 mm The standard industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 415 volt...
Industrial Exhaust Fan - Heavy Hammer - 710 mm The heavy hammer industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...