Industrial Exhaust Fan - Heavy Hammer - 1400 mm

SKU #D1143841

Certification

Placeholder
CE certified
Buy this product
 

Price
$85613
(GST included)
Quantity
 

Payment Methods

Payment Methods

Volume discounts available

Quantity 5 units 7 units 10 units 25 units 50 units
Discount 2% off 3% off 5% off 8% off 10% off
$1 donation

General Description

Industrial Exhaust Fan - Heavy Hammer - 1400 mm


The heavy hammer industrial exhaust fan has a 1400 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 415 volt motor that has a maximum speed of 440 revolutions per minute.

Function
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. A heavy hammer fan has two hammers at the bottom of the fan to open and close the blinds. The fan's hammers open the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and close the shutter when the fan is off.

Applications
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.

Technical Details

Certifications: CE
Type: Heavy Hammer
Size: 1535*1535*400mm
Diameter: 1400 mm
Fan Speed: 440 rpm
Air Volume: 1000 m3/min
Air Pressure: 60 Pa
Noise: less than 65 dB
Show More Technical Specifications
Voucher
Do you have a question about this product?
Receive $5 off your purchase simply for asking a question! Ask us anything! In fact, we use questions asked on our website about our products to further inform future customers, so we want you to leave a question. In addition, you will automatically be entered in our monthly $100 giveaway when you ask a question! Click for details »
If you need an answer to your question immediately, please call our friendly CUSTOMER SUPPORT.

Review your question to make any final changes.
It may be sent to fellow customers so ask as if you were asking a friend.

Barry H.
Mar 18, 2019

Are these unit water proof ? I want to set it up on the outside of the building wall to remove exhaust gases and dust parasitical from the air is this a 3 phase motor.

Hi Barry, thanks for your question. The fan is made of galvanized steel, which is corrosion resistance. The fan is generally installed in the wall or outside of the wall. We also have stainless steel fans if you need a large quantity. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
Peter P.
Mar 18, 2019

Can you tell me the IP rating of the motor. Also they are 380 volt 3 phase I believe also can you price me freight to Stroud NSW post code 2425?

Thank you for your question, Peter. For the 50 Hz motor, it's 1400 rpm. For the 60 Hz motor, it's 1700 rpm. The shipping cost is US$233.99 by FedEx Ground. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
Trent W.
Mar 20, 2019

Do these fans have CSA approval?

Hi Trent, thanks for your interest in our fans. Unfortunately, the fans do not have CSA approval. However, they do have CE and ISO certifications. If you have any other questions or concerns please do not hesitate to contact us.

Reply Deelat Industrial on Mar 26, 2019
Trent W.
Mar 20, 2019

Are your fans limited to 380V?

Hi Trent, thanks for your question. The fans aren't limited to 380V. They can run on 110V, 220V, 380V, 400V, 415V and 450V. If you need assistance with your purchase, please call our sales team at 1-888-667-5776 or email at sales@deelat.com!

Reply Deelat Industrial on Mar 26, 2019
$20581
Ventilation Fan_D1143666_1
SKU #D1143666
Portable Ventilation Fan - Diameter 300 mm - Single Phase - 220V

Portable Ventilation Fan - Diameter 300 mm - Single Phase - 220V The vent fan has a ventilation diameter of 300 mm, and the unit is single phase with a voltage of 220V. It has an air volume of 65 cubic meters/min, and its max RPM rating is 2800...

$55583
Industrial Exhaust Fan_D1143830_1
SKU #D1143830
Industrial Exhaust Fan - Push-Pull Centrifugal - 710 mm

Industrial Exhaust Fan - Push-Pull Centrifugal - 710 mm The push-pull centrifugal industrial exhaust fan has a 710 mm fan diameter. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter...

$33748
Heat and High Temperature Resistant Duct - 400 mm (Diameter) x 10 M (Length) - 100°C_D1143778_1
SKU #D1143778
Heat and High Temperature Resistant Duct - 400 mm (Diameter) x 10 M (Length) - 100°C

Heat and High Temperature Resistant Duct - 400 mm (Diameter) x 10 M (Length) - 100°C The heat and high temperature resistant duct is 400 mm in diameter and has a length of 10 M. It can endure a temperature range of -20°C - 100°C. Function The...

$56914
Industrial Exhaust Fan_D1143837_1
SKU #D1143837
Industrial Exhaust Fan - Heavy Hammer - 900 mm

Industrial Exhaust Fan - Heavy Hammer - 900 mm The heavy hammer industrial exhaust fan has a 900 mm fan diameter. The blades are made from stainless steel, the hammers are made from nylon, and the frame and shutter are made from anti-corrosive...

$78815
Industrial Exhaust Fan_D1143840_1
SKU #D1143840
Industrial Exhaust Fan - Heavy Hammer - 1250 mm

Industrial Exhaust Fan - Heavy Hammer - 1250 mm The heavy hammer industrial exhaust fan has a 1250 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...

$85613
Industrial Exhaust Fan_D1143841_1
SKU #D1143841
Industrial Exhaust Fan - Heavy Hammer - 1400 mm

Industrial Exhaust Fan - Heavy Hammer - 1400 mm The heavy hammer industrial exhaust fan has a 1400 mm fan diameter. The blades are made from stainless steel, the hammers are made of nylon, and the frame and shutter are made from anti-corrosive...

$52437
Industrial Exhaust Fan_D1143851_1
SKU #D1143851
Industrial Exhaust Fan - Wall Mount - 1000 mm - Belt Drive

Industrial Exhaust Fan - Wall Mount - 1000 mm - Belt Drive The wall mount industrial exhaust fan has a 1000 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is...

$64042
Industrial Exhaust Fan_D1143853_1
SKU #D1143853
Industrial Exhaust Fan - Wall Mount - 1250 mm - Belt Drive

Industrial Exhaust Fan - Wall Mount - 1250 mm - Belt Drive The wall mount industrial exhaust fan has a 1250 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is...

$54923
Industrial Exhaust Fan_D1143844_1
SKU #D1143844
Industrial Exhaust Fan - Standard - 900 mm

Industrial Exhaust Fan - Standard - 900 mm The standard industrial exhaust fan has a 900 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 415 volt...

$58234
Industrial Exhaust Fan_D1143845_1
SKU #D1143845
Industrial Exhaust Fan - Standard - 1000 mm

Industrial Exhaust Fan - Standard - 1000 mm The standard industrial exhaust fan has a 1000 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered by a 415 volt...

$47949
Industrial Exhaust Fan_D1143850_1
SKU #D1143850
Industrial Exhaust Fan - Wall Mount - 900 mm - Belt Drive

Industrial Exhaust Fan - Wall Mount - 900 mm - Belt Drive The wall mount industrial exhaust fan has a 900 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is powered...

$55418
Industrial Exhaust Fan_D1143852_1
SKU #D1143852
Industrial Exhaust Fan - Wall Mount - 1100 mm - Belt Drive

Industrial Exhaust Fan - Wall Mount - 1100 mm - Belt Drive The wall mount industrial exhaust fan has a 1100 mm fan diameter. The blades are made from stainless steel and the frame is made from anti-corrosive galvanized steel. The fan is...